Reveden, Main Street, Long Marston, Stratford-upon-Avon, CV37 8RG

-(TPO T10) - Tag 1592 -horse chestnut -Fell tree retaining an approximately 3 metre standing habitat stem for biodiversity purposes. -(TPO T4) - Tag 1593 -scots pine -Fell dead tree and retain a standing habitat stem approximately 2 metres in height. -(TPO T3) -Tag 1594 - scots pine -Fell dead tree and retain a standing habitat stem approximately 2 metres in height. -(TPO T2) - untagged -lime -Remove tree to ground level. -(TPO T8) - Tag 1595 -horse chestnut- Re-pollard by removing regenerative growth back to previous pruning points. -Tag 1596 ?- purple plum-Fell tree to ground level (or alternatively leave a 1 metre habitat stump). -Tag 1598 ? - weeping willow- Reduce crown back to previous pruning points. -crack willow (Pond Area)-Repollard by reducing crown to approximately 4?5 metres in height and thereafter maintain on a regular pollarding cycle. -goat willow (Adjacent to Drive)-Remove lower branches to provide approximately 3 metres clearance over the driveway. -(Group G4) -Boundary Trees and Shrubs- Prune back encroaching branches to provide approximately 3 metres clearance over the driveway. -quince - (rear garden) - Prune to provide at least 1 metre clearance from the house and undertake light crown reduction as necessary to contain size and form. -Leyland cypress hedge - Trim and reshape hedge, reducing growth back as far as practicable whilst retaining sufficient green growth for recovery.

Permission in principle for the erection of one dwelling

- A1 ash - Crown lift to provide 2.7 metres clearance over the grass verge and 5.3 metres clearance over the carriageway, removing secondary and tertiary branch growth on this side of the canopy only. Tree is currently 11 metres tall. - A2 ash - Reduce height to 2.5 metres (below utility pole) - A3 ash - Reduce the height of the upright stem closest to the utility pole by a maximum of 2.5 metres and lateral spread by 1-1.5metres. Reduce the height of the remaining two stems closer to the garage to a maximum finished height of between 5 and 6 metres, due to the presence of decay and cavities resulting from previous works. The tallest stem is currently 16metres tall. - H hawthorn - Reduce height by 1.5 metres. Reduce lateral spread by 1 metre all round to create a balanced crown shape. - DP pine - Reduce height to create a habitat stump (tree is dead) - DSB1 silver birch - Reduce height to create a habitat stump (tree is dead) - DSB2 silver birch - Reduce height to create a habitat stump (tree is dead) - DSB3 silver birch - Reduce height to create a habitat stump (tree is dead) - DSB4 silver birch - Reduce height to create a habitat stump (tree is dead)