128A Finborough Road, London, SW10 9AQ

Submission of details of all external materials to be used in the faces and roofs of the development (including physical material samples), pursuant to Condition 3; details in plan, section and elevation (at a scale of not less than 1:20) of the following: exterior cladding and roofing, new and replacement window details, gates and railings, and rooftop plant associated enclosures, pursuant to Condition 4; details of a statement of how 'Secured by Design' requirements are to be adequately achieved; pursuant to Condition 14; details of how the structure of the basement will be waterproofed (such as the provision of a cavity membrane and sump/pump system as part of the waterproofing measures for the basement), pursuant to Condition 17; details of a scheme for temporary solid timber hoarded fencing (minimum height 2.5 metres) around the perimeter of the site on all site boundaries and/or enclosure of the site, pursuant to Condition 18; details of an Air Quality Dust Management Plan (AQDM... read more

Non-material amendment to planning permission reference: 2025/01090/FUL dated 27th November 2025 for the "Erection of mansard roof extensions; demolition of existing rear back additions; erection of rear extensions at ground, first, and second floor; demolition of existing garage and erection of new single-storey residential dwelling to rear; alterations to the existing front elevation; reconfiguration of existing commercial floorspace (Class E) at ground and basement; reconfiguration and conversion of existing residential accommodation to provide 3 x 3 bedroom flats at first, second, and new third floor level; together with associated alterations, landscaping, and formation of refuse and cycle stores." Amendment sought for minor alterations to the internal layout of the approved third-floor residential accommodation, comprising of reconfiguration of the internal arrangement to relocate the bedroom to the front of the building and the bathroom to the rear.

Submission of details pursuant to Condition 19 (installation of air source heat pumps), and Condition 25 (privacy screens) of planning permission reference: 2024/00747/FUL granted 6th March 2025.